refactor: Rewrite all codes, adding noto mono patchs

Makefile

@@ -1,7 +1,8 @@
 build:
-	python3 build.py
-	py3clean .
+	@mkdir -p out
+	@python3 build.py -B  2> out/err.log
+	@py3clean .
 
 install: build
-	cp out/KawaiiMonoRegularPatched.ttf ~/.local/share/fonts/KawaiiMonoRegular.ttf
-	fc-cache -f -v
+	@cp out/KawaiiMonoRegularPatched.ttf ~/.local/share/fonts/KawaiiMonoRegular.ttf
+	@fc-cache -f -v

build.py

@@ -1,3 +1,7 @@
+import os
+import sys
+sys.path.append(os.path.realpath(os.path.dirname(__file__)+"/src"))
+sys.path.append(os.path.realpath(os.path.dirname(__file__)+"/assets"))
 from src.build import build
 import config
 if __name__ == "__main__": build(config.config)

config.py

@@ -41,25 +41,31 @@ config = {
     # 폰트 용량이 매우 커집니다!!
     "CopyKoreanGlyphs": True,
 
-    # TODO: 이 설정은 아직 동작하지 않습니다
     # 노토 산스 모노에서 가타카나/히라가나
     # 글리프를 복사할 지에 대한 여부입니다
     # 한자는 포함하지 않습니다
-    "CopyJapaneseGlyphs": False,
+    "CopyJapaneseGlyphs": True,
+
+    # 노토 산스에서 단위관련 기호, 원형 기호
+    # 글리프를 복사할 지에 대한 여부입니다
+    # 폰트위 용량이 매우 커집니다!!
+    "CopySymbols": True,
 
-    # TODO: 이 설정은 아직 동작하지 않습니다
     # 노토 산스 모노에서 CJK 공용 한자 글리프를
     # 복사할 지에 대한 여부입니다.
     # 폰트 용량이 매우 커집니다!!
     # 웹용 폰트의 경우 끄는것을 추천합니다
-    "CopyCJKUnifiedIdeographs": False,
+    #! 최소 2분 이상 걸립니다!!
+    "CopyCJKUnifiedIdeographs": True, # 일반적인 CJK Unified
+    "CopyCJKUnifiedIdeographsExtension": False, # Extension A~F
+    "CopyCJKCompatibilityIdeographs": False, # Compatibility Ideograph, Supplement
+    #! 이 옵션들을 활성화시 ttf 포멧으로 저장에 실패할 수 있습니다
+    #? ttf 의 글자수 제한 때문에 그런것이므로, 다른 포멧으로 저장해야합니다.
 
-    # TODO: 이 설정은 아직 동작하지 않습니다
     # 라틴 글리프를 Hack 폰트에서 더 가져옵니다
     # (성조 표시된 라틴, ...)
     "CopyLatinExtra": True,
 
-    # TODO: 이 설정은 아직 동작하지 않습니다
     # Nerd Fonts 패치를 적용할지에 대한
     # 여부입니다. 폰트 용량이 매우 커집니다!!
     # 웹용 폰트의 경우 끄는것을 추천합니다

src/NanumSquareNeo.py

@@ -1,87 +0,0 @@
-from . import wgetHandler
-import os
-import zipfile
-import shutil
-import math
-from . import utility as Utility
-import fontforge
-
-link_NanumSquareNeo = "https://campaign.naver.com/nanumsquare_neo/download/NaverNanumSquareNeo.zip"
-patchVersion = 2 # 업데이트 후 캐시를 무시하기 위해서 사용
-
-# 폰트 다운로드와 열기
-# 배포 방식이 zip 으로 배포이기 때문에 zipfile 라이브러리로
-# 다운로드 후 언팩함
-def getFontPath():
-    if not os.path.exists("assets"): os.mkdir("assets")
-    if not os.path.exists("assets/NanumSquareNeoKr.ttf"):
-        if not os.path.exists("assets/NanumSquareNeoKr.zip"):
-            wgetHandler.download(link_NanumSquareNeo,"assets/NanumSquareNeoKr.zip")
-        print("Unzipping NanumSquareNeoKr.zip",end="")
-        with zipfile.ZipFile("assets/NanumSquareNeoKr.zip", 'r') as zip_ref:
-            extractName = zip_ref.extract("NaverNanumSquareNeo/TTF/NanumSquareNeo-bRg.ttf","assets/NanumSquareNeoKr.extract")
-            os.rename(extractName,"assets/NanumSquareNeoKr.ttf")
-            shutil.rmtree('assets/NanumSquareNeoKr.extract')
-        print(" [OK]")
-    return "assets/NanumSquareNeoKr.ttf"
-
-# 한글 범위의 글립을 선택함
-def selectGlyphs(font):
-    font.selection.none()
-    font.selection.select(("more","ranges","unicode"),0x3131,0x32BF) # ㄱ ~ ㊿
-    font.selection.select(("more","ranges","unicode"),0xAC00,0xD7A3) # 가 ~ 힣
-
-# 굵기/폭 설정 캐시파일 만들기
-def getCache(sourcePath,baseSize=550,weight=16):
-    # 캐시된 파일을 확인하고 있으면 반환
-    filename = "assets/cache/NanumSquareNeoKr.cache_{}.base_{}.weight_{}.sfd".format(patchVersion,baseSize,weight)
-    if os.path.exists(filename):
-        return fontforge.open(filename)
-
-    # 새로운 캐시용 폰트 생성
-    cache=fontforge.font()
-    cache.encoding = 'UnicodeFull'
-
-    # 소스 폰트를 패치시킴
-    source=fontforge.open(sourcePath)
-    selectGlyphs(source)
-    source.changeWeight(weight) # 굵기 변경
-
-    # 너비 지정
-    Utility.setWidthWithSavingPosition(
-        font=source,targetWidth=baseSize*2
-    )
-
-    # 캐시에 붇여넣기
-    source.copy()
-    selectGlyphs(cache)
-    cache.paste()
-
-    # 캐시 폰트 저장
-    if not os.path.exists("assets/cache"): os.mkdir("assets/cache")
-    cache.save(filename)
-    return cache
-
-# Regular 같은 문자열 weight 를 포인트 값으로 변경
-weightStrToNum = {
-    "Regular": 16,
-}
-
-# 캐시를 가져와서 글리프를 타겟 폰트에 붇여넣음
-def pasteGlyphs(target,sourcePath,baseSize=550,weightStr="Regular"):
-
-    # 캐시된 소스를 읽어드림
-    source = getCache(
-        sourcePath = sourcePath,
-        baseSize = baseSize,
-        weight = weightStrToNum.get(weightStr)
-    )
-
-    # 타겟으로 글리프 복사
-    selectGlyphs(source)
-    source.copy()
-    selectGlyphs(target)
-    target.paste()
-
-    # 캐시 닫기
-    source.close()

src/NotoMono.py

@@ -1,38 +0,0 @@
-from . import wgetHandler
-import os
-
-github_NotoSansMonoCJKkr = "https://github.com/googlefonts/noto-cjk/raw/main/Sans/Mono/NotoSansMonoCJKkr-Regular.otf"
-
-# 폰트 다운로드와 열기
-def getFontPath():
-    if not os.path.exists("assets"): os.mkdir("assets")
-    if not os.path.exists("assets/NotoMonoCJKkr.otf"):
-        wgetHandler.download(github_NotoSansMonoCJKkr,"assets/NotoMonoCJKkr.otf")
-    return "assets/NotoMonoCJKkr.otf"
-
-def pasteGlyphs(target,source,baseSize=550,JapaneseGlyphs=False,CJKUnifiedIdeographs=False):
-    source.cidFlatten()
-
-    def select(font):
-        font.selection.none()
-        font.selection.select(("more","ranges","unicode"),0x3131,0x32BF) # ㄱ ~ ㊿
-        font.selection.select(("more","ranges","unicode"),0xAC00,0xD7A3) # 가 ~ 힣
-    select(source)
-
-    # 넓은 글자 크기 (한글에 모두 적용)
-    wideWidth = baseSize*2
-    for glyph in source.selection.byGlyphs:
-        widthDiff = wideWidth-glyph.width # 타겟 너비와 얼마나 크기 차이가 나는지
-        sideAdjust = widthDiff/2 # 좌우 사이드 조정해야하는 정도
-        glyph.left_side_bearing = int(glyph.left_side_bearing + math.floor(sideAdjust)) # 좌우 베어링을 조정함
-        glyph.right_side_bearing = int(glyph.right_side_bearing + math.ceil(sideAdjust))
-        glyph.width = wideWidth # 타겟 너비로 정확하게 설정
-
-    # 타겟으로 글리프 복사
-    source.copy()
-    select(target)
-    target.paste()
-
-
-if __name__ == "__main__":
-    getFontPath()

src/build.py

@@ -1,58 +0,0 @@
-import fontforge
-import os
-
-from . import NanumSquareNeo as NanumSquareNeoLoader
-from . import NotoMono as NotoMonoLoader
-from . import KawaiiMono as KawaiiMonoLoader
-from . import utility as Utility
-
-def build(config=None):
-    # 메인 폰트 불러오기
-    kawaii = fontforge.open(
-        KawaiiMonoLoader.getFontPath())
-
-    # 모든 글리프를 붇여넣을 수 있도록 인코딩을 utf full 로 변경
-    kawaii.encoding = 'UnicodeFull'
-
-    # 폰트 가로폭 설정
-    baseSize = config.get("FontBaseWidth")
-    if baseSize != 550:
-        Utility.setWidthWithSavingPosition(
-            font=kawaii,targetWidth=baseSize
-        )
-
-    # 한글 글리프 붇여넣기
-    if config.get("CopyKoreanGlyphs"):
-        # 나눔 스퀘어 네오 다운로드/불러오기
-        nanumSquareNeo = NanumSquareNeoLoader.getFontPath()
-        # 글리프 붇여넣기
-        NanumSquareNeoLoader.pasteGlyphs(
-            target=kawaii,baseSize=baseSize,weightStr="Regular",
-            sourcePath=nanumSquareNeo)
-
-    if (config.get("CopyJapaneseGlyphs") or
-        config.get("CopyCJKUnifiedIdeographs")):
-        # 노토 모노 다운로드/불러오기
-        notoMono = fontforge.open(
-            NotoMonoLoader.getFontPath())
-        # 글리프 붇여넣기
-        NotoMonoLoader.pasteGlyphs(
-            JapaneseGlyphs=config.get("CopyJapaneseGlyphs") or False,
-            CJKUnifiedIdeographs=config.get("CopyCJKUnifiedIdeographs") or False,
-            target=kawaii,baseSize=550,
-            source=notoMono)
-        notoMono.close()
-
-    # 생성
-    if not os.path.exists("out"): os.mkdir("out")
-    kawaii.generate("out/"+"KawaiiMonoRegularPatched.ttf")
-
-    # KawaiiMonoRegularPatched.ttf
-    # KawaiiMonoRegularPatched.otf
-    # KawaiiMonoRegularPatched.woff
-    # KawaiiMonoRegularPatched.eot
-
-    # 파일 닫기
-    kawaii.close()
-
-if __name__ == "__main__": build()

src/build/NanumSquareNeo/__init__.py

@@ -0,0 +1,7 @@
+
+patchVersion = 2 # 업데이트 후 캐시를 무시하기 위해서 사용
+
+from . import select as selectGlyphs
+from .download import download
+from .cacheBuilder import getCachedFont
+from .patcher import pasteGlyphs

src/build/NanumSquareNeo/cacheBuilder.py

@@ -0,0 +1,40 @@
+
+import utility as Utility
+import fontforge
+import os
+from . import selectGlyphs
+from . import patchVersion
+
+# 굵기/폭 설정 캐시파일 만들기
+def getCachedFont(sourcePath,baseSize=550,weight=16):
+    # 캐시된 파일을 확인하고 있으면 반환
+    filename = "assets/cache/NanumSquareNeoKr.cache_{}.base_{}.weight_{}.sfd".format(patchVersion,baseSize,weight)
+    if os.path.exists(filename):
+        print("Found build cache [OK]")
+        return fontforge.open(filename)
+    print("Creating new build cache",end="")
+
+    # 새로운 캐시용 폰트 생성
+    cache=fontforge.font()
+    cache.encoding = 'UnicodeFull'
+
+    # 소스 폰트를 패치시킴
+    source=fontforge.open(sourcePath)
+    selectGlyphs.Korean(source)
+    source.changeWeight(weight) # 굵기 변경
+
+    # 너비 지정
+    Utility.setWidthWithSavingPosition(
+        font=source,targetWidth=baseSize*2
+    )
+
+    # 캐시에 붇여넣기
+    source.copy()
+    selectGlyphs.Korean(cache)
+    cache.paste()
+
+    # 캐시 폰트 저장
+    if not os.path.exists("assets/cache"): os.mkdir("assets/cache")
+    cache.save(filename)
+    print(" [OK]")
+    return cache

src/build/NanumSquareNeo/download.py

@@ -0,0 +1,22 @@
+import zipfile
+import shutil
+import wgetHandler
+import os
+
+link_NanumSquareNeo = "https://campaign.naver.com/nanumsquare_neo/download/NaverNanumSquareNeo.zip"
+
+# 폰트 다운로드와 열기
+# 배포 방식이 zip 으로 배포이기 때문에 zipfile 라이브러리로
+# 다운로드 후 언팩함
+def download():
+    if not os.path.exists("assets"): os.mkdir("assets")
+    if not os.path.exists("assets/NanumSquareNeoKr.ttf"):
+        if not os.path.exists("assets/NanumSquareNeoKr.zip"):
+            wgetHandler.download(link_NanumSquareNeo,"assets/NanumSquareNeoKr.zip")
+        print("Unzipping NanumSquareNeoKr.zip",end="")
+        with zipfile.ZipFile("assets/NanumSquareNeoKr.zip", 'r') as zip_ref:
+            extractName = zip_ref.extract("NaverNanumSquareNeo/TTF/NanumSquareNeo-bRg.ttf","assets/NanumSquareNeoKr.extract")
+            os.rename(extractName,"assets/NanumSquareNeoKr.ttf")
+            shutil.rmtree('assets/NanumSquareNeoKr.extract')
+        print(" [OK]")
+    return "assets/NanumSquareNeoKr.ttf"

src/build/NanumSquareNeo/patcher.py

@@ -0,0 +1,32 @@
+from . import getCachedFont
+from . import selectGlyphs
+
+# Regular 같은 문자열 weight 를 포인트 값으로 변경
+weightStrToNum = {
+    "Regular": 16,
+}
+
+# 캐시를 가져와서 글리프를 타겟 폰트에 붇여넣음
+def pasteGlyphs(target,sourcePath,deselectOriginalGlyphs,baseSize=550,weightStr="Regular"):
+
+    # 캐시된 소스를 읽어드림
+    print("Patching: NanumSquareNeo")
+    source = getCachedFont(
+        sourcePath = sourcePath,
+        baseSize = baseSize,
+        weight = weightStrToNum.get(weightStr)
+    )
+
+    selectGlyphs.Clear(source)
+    selectGlyphs.Clear(target)
+
+    # 타겟으로 글리프 복사
+    selectGlyphs.Korean(source)
+    deselectOriginalGlyphs(source)
+    source.copy()
+    selectGlyphs.Korean(target)
+    deselectOriginalGlyphs(target)
+    target.paste()
+
+    # 캐시 닫기
+    source.close()

src/build/NanumSquareNeo/select.py

@@ -0,0 +1,8 @@
+# 한글 범위의 글립을 선택함
+def Korean(font):
+    font.selection.none()
+    font.selection.select(("more","ranges","unicode"),0x3131,0x32BF) # ㄱ ~ ㊿
+    font.selection.select(("more","ranges","unicode"),0xAC00,0xD7A3) # 가 ~ 힣
+
+def Clear(font):
+    font.selection.none()

src/build/NerdFonts/__init__.py

@@ -0,0 +1,3 @@
+
+from .download import downloadPatcher
+from .download import nerdFonts_Download_Test

src/build/NerdFonts/download.py

@@ -1,20 +1,6 @@
 import os
+import wgetHandler
 import zipfile
-# from .. import wgetHandler
-
-import os
-import importlib
-basePath = os.path.realpath(os.path.dirname(__file__)+"/../")
-wgetHandler = importlib.util.module_from_spec(importlib.util.spec_from_file_location("wgetHandler",basePath+"/wgetHandler.py"))
-# import wgetHandler
-
-print("__file__ : {__file__}".format(__file__=__file__))
-print("wgetHandler (spec)")
-print(importlib.util.spec_from_file_location("wgetHandler",basePath))
-print("wgetHandler [object]")
-print(wgetHandler)
-print(help(wgetHandler))
-# import wgetHandler
 
 link_FontPatcher = "https://github.com/ryanoasis/nerd-fonts/releases/latest/download/FontPatcher.zip"
 
@@ -26,7 +12,10 @@ def downloadPatcher():
         print("Unzipping NerdFontPatcher.zip",end="")
         with zipfile.ZipFile("assets/NerdFontPatcher.zip", 'r') as zip_ref:
             extractName = zip_ref.extractall("assets/NerdFontPatcher_extract")
+        os.rename("assets/NerdFontPatcher_extract/font-patcher","assets/NerdFontPatcher_extract/fontPatcher.py")
+        with open("assets/NerdFontPatcher_extract/__init__.py","w") as file:
+            file.write("")
         print(" [OK]")
-    return "assets/NanumSquareNeoKr.ttf"
+    return "assets/NerdFontPatcher_extract"
 
-if __name__ == "__main__": downloadPatcher()
+def nerdFonts_Download_Test(): downloadPatcher()

src/build/NotoMono/__init__.py

@@ -0,0 +1,7 @@
+
+patchVersion = 2
+
+from .download import download
+from . import select as selectGlyphs
+from .cacheBuilder import getCachedFont
+from .patcher import pasteGlyphs

src/build/NotoMono/cacheBuilder.py

@@ -0,0 +1,56 @@
+
+import utility as Utility
+import fontforge
+import os
+from . import selectGlyphs
+from . import patchVersion
+
+# 굵기/폭 설정 캐시파일 만들기
+def getCachedFont(sourcePath,EnabledItems,baseSize=550,weight=16):
+    # 캐시된 파일을 확인하고 있으면 반환
+    filename = "assets/cache/NotoMono.cache_{}.base_{}.weight_{}{}{}{}{}{}.sfd".format(
+        patchVersion,baseSize,weight,
+        EnabledItems.get("JapaneseGlyphs") and ".jp" or "",
+        EnabledItems.get("CJKUnifiedIdeographs") and ".id" or "",
+        EnabledItems.get("CopyCJKUnifiedIdeographsExtension") and ".ide" or "",
+        EnabledItems.get("CopyCJKCompatibilityIdeographs") and ".cid" or "",
+        EnabledItems.get("Symbols") and ".sym" or "")
+    if os.path.exists(filename):
+        print("Found build cache [OK]")
+        return fontforge.open(filename)
+    print("Creating new build cache",end="")
+
+    # 새로운 캐시용 폰트 생성
+    cache=fontforge.font()
+    cache.encoding = 'UnicodeFull'
+
+    # 소스 폰트를 패치시킴
+    source=fontforge.open(sourcePath)
+    source.cidFlatten()
+    source.encoding = 'UnicodeFull'
+    if EnabledItems.get("JapaneseGlyphs"): selectGlyphs.JapaneseGlyphs(source)
+    if EnabledItems.get("Symbols"): selectGlyphs.Symbols(source)
+    source.changeWeight(weight) # 굵기 변경
+    selectGlyphs.SelectByEnabledList(source,EnabledItems)
+    # 한자 글립은 냥많아서 크기조절하면 끝이 안난다냥
+
+    # 너비 지정
+    Utility.setWidthWithSavingPosition(
+        font=source,targetWidth=baseSize*2
+    )
+
+    Utility.scale(font=source,targetScale=0.85)
+
+    # 캐시에 붇여넣기
+    source.copy()
+    selectGlyphs.SelectByEnabledList(cache,EnabledItems)
+    cache.paste()
+
+    selectGlyphs.Clear(cache)
+    selectGlyphs.Clear(source)
+
+    # 캐시 폰트 저장
+    if not os.path.exists("assets/cache"): os.mkdir("assets/cache")
+    cache.save(filename)
+    print(" [OK]")
+    return cache

src/build/NotoMono/download.py

@@ -0,0 +1,11 @@
+import os
+import wgetHandler
+
+github_NotoSansMonoCJKkr = "https://github.com/googlefonts/noto-cjk/raw/main/Sans/Mono/NotoSansMonoCJKkr-Regular.otf"
+
+# 폰트 다운로드와 열기
+def download():
+    if not os.path.exists("assets"): os.mkdir("assets")
+    if not os.path.exists("assets/NotoMonoCJKkr.otf"):
+        wgetHandler.download(github_NotoSansMonoCJKkr,"assets/NotoMonoCJKkr.otf")
+    return "assets/NotoMonoCJKkr.otf"

src/build/NotoMono/patcher.py

@@ -0,0 +1,30 @@
+from . import selectGlyphs
+from . import getCachedFont
+
+# Regular 같은 문자열 weight 를 포인트 값으로 변경
+weightStrToNum = {
+    "Regular": 16,
+}
+
+def pasteGlyphs(target,sourcePath,deselectOriginalGlyphs,EnabledItems,baseSize=550,weightStr="Regular"):
+    # 캐시된 소스를 읽어드림
+    source = getCachedFont(
+        sourcePath = sourcePath,
+        baseSize = baseSize,
+        weight = weightStrToNum.get(weightStr),
+        EnabledItems = EnabledItems
+    )
+
+    selectGlyphs.Clear(source)
+    selectGlyphs.Clear(target)
+
+    # 타겟으로 글리프 복사
+    selectGlyphs.SelectByEnabledList(source,EnabledItems)
+    deselectOriginalGlyphs(source)
+    source.copy()
+    selectGlyphs.SelectByEnabledList(source,target)
+    deselectOriginalGlyphs(target)
+    target.paste()
+
+    # 캐시 닫기
+    source.close()

src/build/NotoMono/select.py

@@ -0,0 +1,73 @@
+selFlag = ("more","ranges","unicode")
+
+# 일본어 글립 선택
+def JapaneseGlyphs(font):
+    # 사각문자 (Square)
+    font.selection.select(selFlag,0x32FF,0x2271)
+    font.selection.select(selFlag,0x337B,0x337F) # Missing one char
+    font.selection.select(selFlag,0x1F200,0x1F200)
+
+    # 히라가나/가타카나
+    font.selection.select(selFlag,0x3041,0x30FF)
+    font.selection.select(selFlag,0x31F0,0x31FF) # SMALL Katakana
+    font.selection.select(selFlag,0xFF66,0xFF9F) # HalfWidth Katakana
+
+    # 일어 기호
+    font.selection.select(selFlag,0xFF5B,0xFF65)
+
+# CJK 한자 글립 선택
+def CJKUnifiedIdeographs(font):
+    # CJK Stroke
+    font.selection.select(selFlag,0x31C0,0x31E3)
+
+    # Bopomofo
+    font.selection.select(selFlag,0x3105,0x312F)
+    font.selection.select(selFlag,0x31A0,0x31BB)
+
+    # CJK Unified Ideograph
+    font.selection.select(selFlag,0x4E00,0x9FFF)
+
+
+def CJKUnifiedIdeographsExtension(font):
+    font.selection.select(selFlag,0x3400,0x4DBF) # Extension A
+    font.selection.select(selFlag,0x20000,0x2A6DF) # Extension B
+    font.selection.select(selFlag,0x2A700,0x2B73F) # Extension C
+    font.selection.select(selFlag,0x2B740,0x2B81F) # Extension D
+    font.selection.select(selFlag,0x2B820,0x2CEAF) # Extension E
+    font.selection.select(selFlag,0x2CEB0,0x2EBEF) # Extension F
+
+def CJKCompatibilityIdeographs(font):
+    # CJK Compatibility Ideograph
+    font.selection.select(selFlag,0xF900,0xFAFF)
+    # CJK Compatibility Ideographs Supplement
+    font.selection.select(selFlag,0x2F800,0x2FA1F)
+
+def Symbols(font):
+    # 원형, 단위기호
+    font.selection.select(selFlag,0x3220,0x3250)
+    font.selection.select(selFlag,0x3220,0x3250)
+    font.selection.select(selFlag,0x3280,0x32B0) # Missing ...
+    font.selection.select(selFlag,0x32C0,0x32FE)
+
+    # 단위 기호
+    font.selection.select(selFlag,0x3358,0x337A)
+    font.selection.select(selFlag,0x3380,0x33FF)
+
+    # Latin Ligature
+    font.selection.select(selFlag,0xFB00,0xFB04)
+
+    # 특수기호/FULLWIDTH Latin
+    font.selection.select(selFlag,0xFE10,0xFF5A)
+    font.selection.select(selFlag,0xFFE0,0xFFEE)
+    font.selection.select(selFlag,0x1F100,0x1F1AC)
+    font.selection.select(selFlag,0x1F201,0x1F251)
+
+def SelectByEnabledList(target,EnabledItems):
+    if EnabledItems.get("JapaneseGlyphs"): JapaneseGlyphs(target)
+    if EnabledItems.get("CJKUnifiedIdeographs"): CJKUnifiedIdeographs(target)
+    if EnabledItems.get("CJKUnifiedIdeographsExtension"): CJKUnifiedIdeographsExtension(target)
+    if EnabledItems.get("CJKCompatibilityIdeographs"): CJKCompatibilityIdeographs(target)
+    if EnabledItems.get("Symbols"): Symbols(target)
+
+def Clear(font):
+    font.selection.none()

src/build/__init__.py

@@ -0,0 +1,4 @@
+
+from .build import build
+
+from .NerdFonts import nerdFonts_Download_Test

src/build/build.py

@@ -0,0 +1,91 @@
+import os
+import utility as Utility
+import fontforge
+
+from . import NerdFonts as NerdFontsLoader
+from . import NanumSquareNeo as NanumSquareNeoLoader
+from . import NotoMono as NotoMonoLoader
+from . import KawaiiMono as KawaiiMonoLoader
+
+deselectFlags = ("less","unicode")
+
+def build(config=None):
+    # 메인 폰트 불러오기 / 에셋 다운로드
+    kawaii = fontforge.open(
+        KawaiiMonoLoader.getFontPath())
+    print("-------------- DOWNLOAD PATCH CONTENTS --------------")
+    # 나눔 스퀘어 네오 다운로드
+    nanumSquareNeo = None
+    if config.get("CopyKoreanGlyphs"):
+        nanumSquareNeo = NanumSquareNeoLoader.download()
+    # 노토 모노 다운로드/불러오기
+    notoMono = None
+    if (config.get("CopyJapaneseGlyphs") or
+        config.get("CopyCJKUnifiedIdeographs") or
+        config.get("CopyCJKUnifiedIdeographsExtension") or
+        config.get("CopyCJKCompatibilityIdeographs")):
+        notoMono = NotoMonoLoader.download()
+    # Nerd fonts 패치기 다운로드
+    nerdFontsPatcherPath = None
+    if config.get("NerdFonts"):
+        nerdFontsPatcherPath = NerdFontsLoader.downloadPatcher()
+    print("--------------------- Patching ---------------------")
+
+    # 유지 목록 (덮어쓰기 금지) 만들기
+    kawaii.selection.all()
+    keepList = [i.unicode for i in kawaii.selection.byGlyphs]
+    def deselectOriginalGlyphs(target):
+        for unicode in keepList:
+            if unicode == -1: continue
+            target.selection.select(deselectFlags,unicode)
+
+    # 모든 글리프를 붇여넣을 수 있도록 인코딩을 utf full 로 변경
+    kawaii.encoding = 'UnicodeFull'
+
+    # 폰트 가로폭 설정
+    baseSize = config.get("FontBaseWidth")
+    if baseSize != 550:
+        Utility.setWidthWithSavingPosition(
+            font=kawaii,targetWidth=baseSize
+        )
+
+    # 한글 글리프 붇여넣기
+    if nanumSquareNeo:
+        # 글리프 붇여넣기
+        NanumSquareNeoLoader.pasteGlyphs(
+            target=kawaii,baseSize=baseSize,weightStr="Regular",
+            sourcePath=nanumSquareNeo,
+            deselectOriginalGlyphs = deselectOriginalGlyphs)
+
+    # 일어 글리프 혹은 한자 글리프 추가
+    if notoMono:
+        # 글리프 붇여넣기
+        NotoMonoLoader.pasteGlyphs(
+            EnabledItems = {
+                "JapaneseGlyphs": config.get("CopyJapaneseGlyphs") or False,
+                "CJKUnifiedIdeographs": config.get("CopyCJKUnifiedIdeographs") or False,
+                "CJKUnifiedIdeographsExtension": config.get("CopyCJKUnifiedIdeographsExtension"),
+                "CJKCompatibilityIdeographs": config.get("CopyCJKCompatibilityIdeographs"),
+            },
+            Symbols=config.get("CopySymbols") or False,
+            target=kawaii,baseSize=550,
+            sourcePath=notoMono,
+            deselectOriginalGlyphs = deselectOriginalGlyphs)
+
+    # NerdFonts 패치 적용
+    # if config.get("NerdFonts"):
+    #     nerdFontsPatcherPath = NerdFontsLoader.downloadPatcher()
+
+    # 생성
+    if not os.path.exists("out"): os.mkdir("out")
+    kawaii.generate("out/"+"KawaiiMonoRegularPatched.ttf")
+
+    # KawaiiMonoRegularPatched.ttf
+    # KawaiiMonoRegularPatched.otf
+    # KawaiiMonoRegularPatched.woff
+    # KawaiiMonoRegularPatched.eot
+
+    # 파일 닫기
+    kawaii.close()
+
+if __name__ == "__main__": build()

src/liga/liga.py

@@ -1,4 +0,0 @@
-
-def pasteGlyphs(target,sourceList):
-    
-

src/utility/__init__.py

@@ -0,0 +1,2 @@
+
+from .utility import *

src/utility/utility.py

@@ -1,4 +1,5 @@
 import math
+import psMat
 
 def setWidthWithSavingPosition(font,targetWidth):
     for glyph in font.selection.byGlyphs:
@@ -7,3 +8,7 @@ def setWidthWithSavingPosition(font,targetWidth):
         glyph.left_side_bearing = int(glyph.left_side_bearing + math.floor(sideAdjust)) # 좌우 베어링을 조정함
         glyph.right_side_bearing = int(glyph.right_side_bearing + math.ceil(sideAdjust))
         glyph.width = targetWidth # 타겟 너비로 정확하게 설정
+
+def scale(font,targetScale):
+    font.transform(psMat.scale(targetScale))
+    font.round()

src/wget

@@ -1 +0,0 @@
-Subproject commit fdd3a0f8404ccab90f939f9952af139e6c55142a

src/wgetHandler/__init__.py

@@ -0,0 +1,2 @@
+
+from .wgetHandler import *

src/wgetHandler/wget/README.txt

@@ -0,0 +1,95 @@
+Usage
+=====
+
+  python -m wget [options] <URL>
+
+  options:
+    -o --output FILE|DIR   output filename or directory
+
+
+API Usage
+=========
+
+  >>> import wget
+  >>> url = 'http://www.futurecrew.com/skaven/song_files/mp3/razorback.mp3'
+  >>> filename = wget.download(url)
+  100% [................................................] 3841532 / 3841532>
+  >> filename
+  'razorback.mp3'
+
+The skew that you see above is a documented side effect.
+Alternative progress bar:
+
+  >>> wget.download(url, bar=bar_thermometer)
+
+
+ChangeLog
+=========
+2.2 (2014-07-19)
+ * it again can download without -o option
+
+2.1 (2014-07-10)
+ * it shows command line help
+ * -o option allows to select output file/directory
+
+   * download(url, out, bar) contains out parameter
+
+2.0 (2013-04-26)
+ * it shows percentage
+ * it has usage examples
+ * it changes if being used as a library
+
+   * download shows progress bar by default
+   * bar_adaptive gets improved algorithm
+   * download(url, bar) contains bar parameter
+     * bar(current, total)
+   * progress_callback is named callback_progress
+
+1.0 (2012-11-13)
+ * it runs with Python 3
+
+0.9 (2012-11-13)
+ * it renames file if it already exists
+ * it can be used as a library
+
+   * download(url) returns filename
+   * bar_adaptive() draws progress bar
+   * bar_thermometer() simplified bar
+
+0.8 (2011-05-03)
+ * it detects filename from HTTP headers
+
+0.7 (2011-03-01)
+ * compatibility fix for Python 2.5
+ * limit width of progress bar to 100 chars
+
+0.6 (2010-04-24)
+ * it detects console width on POSIX
+
+0.5 (2010-04-23)
+ * it detects console width on Windows
+
+0.4 (2010-04-15)
+ * it shows cute progress bar
+
+0.3 (2010-04-05)
+ * it creates temp file in current dir
+
+0.2 (2010-02-16)
+ * it tries to detect filename from URL
+
+0.1 (2010-02-04)
+ * it can download file
+
+
+Release Checklist
+=================
+
+| [ ] update version in wget.py
+| [x] update description in setup.py
+| [ ] python setup.py check -mrs
+| [ ] python setup.py sdist upload
+| [ ] tag hg version
+
+-- 
+anatoly techtonik <techtonik@gmail.com>

src/wgetHandler/wget/setup.py

@@ -0,0 +1,37 @@
+from distutils.core import setup
+
+
+def get_version(relpath):
+    """read version info from file without importing it"""
+    from os.path import dirname, join
+    for line in open(join(dirname(__file__), relpath)):
+        if '__version__' in line:
+            if '"' in line:
+                # __version__ = "0.9"
+                return line.split('"')[1]
+            elif "'" in line:
+                return line.split("'")[1]
+
+setup(
+    name='wget',
+    version=get_version('wget.py'),
+    author='anatoly techtonik <techtonik@gmail.com>',
+    url='http://bitbucket.org/techtonik/python-wget/',
+
+    description="pure python download utility",
+    license="Public Domain",
+    classifiers=[
+        'Environment :: Console',
+        'License :: Public Domain',
+        'Operating System :: OS Independent',
+        'Programming Language :: Python :: 2',
+        'Programming Language :: Python :: 3',
+        'Topic :: Software Development :: Libraries :: Python Modules',
+        'Topic :: System :: Networking',
+        'Topic :: Utilities',
+    ],
+
+    py_modules=['wget'],
+
+    long_description=open('README.txt').read(),
+)

src/wgetHandler/wget/wget.py

@@ -0,0 +1,402 @@
+#!/usr/bin/env python
+"""
+Download utility as an easy way to get file from the net
+ 
+  python -m wget <URL>
+  python wget.py <URL>
+
+Downloads: http://pypi.python.org/pypi/wget/
+Development: http://bitbucket.org/techtonik/python-wget/
+
+wget.py is not option compatible with Unix wget utility,
+to make command line interface intuitive for new people.
+
+Public domain by anatoly techtonik <techtonik@gmail.com>
+Also available under the terms of MIT license
+Copyright (c) 2010-2014 anatoly techtonik
+"""
+
+
+import sys, shutil, os
+import tempfile
+import math
+
+PY3K = sys.version_info >= (3, 0)
+if PY3K:
+  import urllib.request as urllib
+  import urllib.parse as urlparse
+else:
+  import urllib
+  import urlparse
+
+
+__version__ = "2.3-beta1"
+
+
+def filename_from_url(url):
+    """:return: detected filename or None"""
+    fname = os.path.basename(urlparse.urlparse(url).path)
+    if len(fname.strip(" \n\t.")) == 0:
+        return None
+    return fname
+
+def filename_from_headers(headers):
+    """Detect filename from Content-Disposition headers if present.
+    http://greenbytes.de/tech/tc2231/
+
+    :param: headers as dict, list or string
+    :return: filename from content-disposition header or None
+    """
+    if type(headers) == str:
+        headers = headers.splitlines()
+    if type(headers) == list:
+        headers = dict([x.split(':', 1) for x in headers])
+    cdisp = headers.get("Content-Disposition")
+    if not cdisp:
+        return None
+    cdtype = cdisp.split(';')
+    if len(cdtype) == 1:
+        return None
+    if cdtype[0].strip().lower() not in ('inline', 'attachment'):
+        return None
+    # several filename params is illegal, but just in case
+    fnames = [x for x in cdtype[1:] if x.strip().startswith('filename=')]
+    if len(fnames) > 1:
+        return None
+    name = fnames[0].split('=')[1].strip(' \t"')
+    name = os.path.basename(name)
+    if not name:
+        return None
+    return name
+
+def filename_fix_existing(filename):
+    """Expands name portion of filename with numeric ' (x)' suffix to
+    return filename that doesn't exist already.
+    """
+    dirname = '.' 
+    name, ext = filename.rsplit('.', 1)
+    names = [x for x in os.listdir(dirname) if x.startswith(name)]
+    names = [x.rsplit('.', 1)[0] for x in names]
+    suffixes = [x.replace(name, '') for x in names]
+    # filter suffixes that match ' (x)' pattern
+    suffixes = [x[2:-1] for x in suffixes
+                   if x.startswith(' (') and x.endswith(')')]
+    indexes  = [int(x) for x in suffixes
+                   if set(x) <= set('0123456789')]
+    idx = 1
+    if indexes:
+        idx += sorted(indexes)[-1]
+    return '%s (%d).%s' % (name, idx, ext)
+
+
+# --- terminal/console output helpers ---
+
+def get_console_width():
+    """Return width of available window area. Autodetection works for
+       Windows and POSIX platforms. Returns 80 for others
+
+       Code from http://bitbucket.org/techtonik/python-pager
+    """
+
+    if os.name == 'nt':
+        STD_INPUT_HANDLE  = -10
+        STD_OUTPUT_HANDLE = -11
+        STD_ERROR_HANDLE  = -12
+
+        # get console handle
+        from ctypes import windll, Structure, byref
+        try:
+            from ctypes.wintypes import SHORT, WORD, DWORD
+        except ImportError:
+            # workaround for missing types in Python 2.5
+            from ctypes import (
+                c_short as SHORT, c_ushort as WORD, c_ulong as DWORD)
+        console_handle = windll.kernel32.GetStdHandle(STD_OUTPUT_HANDLE)
+
+        # CONSOLE_SCREEN_BUFFER_INFO Structure
+        class COORD(Structure):
+            _fields_ = [("X", SHORT), ("Y", SHORT)]
+
+        class SMALL_RECT(Structure):
+            _fields_ = [("Left", SHORT), ("Top", SHORT),
+                        ("Right", SHORT), ("Bottom", SHORT)]
+
+        class CONSOLE_SCREEN_BUFFER_INFO(Structure):
+            _fields_ = [("dwSize", COORD),
+                        ("dwCursorPosition", COORD),
+                        ("wAttributes", WORD),
+                        ("srWindow", SMALL_RECT),
+                        ("dwMaximumWindowSize", DWORD)]
+
+        sbi = CONSOLE_SCREEN_BUFFER_INFO()
+        ret = windll.kernel32.GetConsoleScreenBufferInfo(console_handle, byref(sbi))
+        if ret == 0:
+            return 0
+        return sbi.srWindow.Right+1
+
+    elif os.name == 'posix':
+        from fcntl import ioctl
+        from termios import TIOCGWINSZ
+        from array import array
+
+        winsize = array("H", [0] * 4)
+        try:
+            ioctl(sys.stdout.fileno(), TIOCGWINSZ, winsize)
+        except IOError:
+            pass
+        return (winsize[1], winsize[0])[0]
+
+    return 80
+
+
+def bar_thermometer(current, total, width=80):
+    """Return thermometer style progress bar string. `total` argument
+    can not be zero. The minimum size of bar returned is 3. Example:
+
+        [..........            ]
+
+    Control and trailing symbols (\r and spaces) are not included.
+    See `bar_adaptive` for more information.
+    """
+    # number of dots on thermometer scale
+    avail_dots = width-2
+    shaded_dots = int(math.floor(float(current) / total * avail_dots))
+    return '[' + '.'*shaded_dots + ' '*(avail_dots-shaded_dots) + ']'
+
+def bar_adaptive(current, total, width=80):
+    """Return progress bar string for given values in one of three
+    styles depending on available width:
+
+        [..  ] downloaded / total
+        downloaded / total
+        [.. ]
+
+    if total value is unknown or <= 0, show bytes counter using two
+    adaptive styles:
+
+        %s / unknown
+        %s
+
+    if there is not enough space on the screen, do not display anything
+
+    returned string doesn't include control characters like \r used to
+    place cursor at the beginning of the line to erase previous content.
+
+    this function leaves one free character at the end of string to
+    avoid automatic linefeed on Windows.
+    """
+
+    # process special case when total size is unknown and return immediately
+    if not total or total < 0:
+        msg = "%s / unknown" % current
+        if len(msg) < width:    # leaves one character to avoid linefeed
+            return msg
+        if len("%s" % current) < width:
+            return "%s" % current
+
+    # --- adaptive layout algorithm ---
+    #
+    # [x] describe the format of the progress bar
+    # [x] describe min width for each data field
+    # [x] set priorities for each element
+    # [x] select elements to be shown
+    #   [x] choose top priority element min_width < avail_width
+    #   [x] lessen avail_width by value if min_width
+    #   [x] exclude element from priority list and repeat
+    
+    #  10% [.. ]  10/100
+    # pppp bbbbb sssssss
+
+    min_width = {
+      'percent': 4,  # 100%
+      'bar': 3,      # [.]
+      'size': len("%s" % total)*2 + 3, # 'xxxx / yyyy'
+    }
+    priority = ['percent', 'bar', 'size']
+
+    # select elements to show
+    selected = []
+    avail = width
+    for field in priority:
+      if min_width[field] < avail:
+        selected.append(field)
+        avail -= min_width[field]+1   # +1 is for separator or for reserved space at
+                                      # the end of line to avoid linefeed on Windows
+    # render
+    output = ''
+    for field in selected:
+
+      if field == 'percent':
+        # fixed size width for percentage
+        output += ('%s%%' % (100 * current // total)).rjust(min_width['percent'])
+      elif field == 'bar':  # [. ]
+        # bar takes its min width + all available space
+        output += bar_thermometer(current, total, min_width['bar']+avail)
+      elif field == 'size':
+        # size field has a constant width (min == max)
+        output += ("%s / %s" % (current, total)).rjust(min_width['size'])
+
+      selected = selected[1:]
+      if selected:
+        output += ' '  # add field separator
+
+    return output
+
+# --/ console helpers
+
+
+__current_size = 0  # global state variable, which exists solely as a
+                    # workaround against Python 3.3.0 regression
+                    # http://bugs.python.org/issue16409
+                    # fixed in Python 3.3.1
+def callback_progress(blocks, block_size, total_size, bar_function):
+    """callback function for urlretrieve that is called when connection is
+    created and when once for each block
+
+    draws adaptive progress bar in terminal/console
+
+    use sys.stdout.write() instead of "print,", because it allows one more
+    symbol at the line end without linefeed on Windows
+
+    :param blocks: number of blocks transferred so far
+    :param block_size: in bytes
+    :param total_size: in bytes, can be -1 if server doesn't return it
+    :param bar_function: another callback function to visualize progress
+    """
+    global __current_size
+ 
+    width = min(100, get_console_width())
+
+    if sys.version_info[:3] == (3, 3, 0):  # regression workaround
+        if blocks == 0:  # first call
+            __current_size = 0
+        else:
+            __current_size += block_size
+        current_size = __current_size
+    else:
+        current_size = min(blocks*block_size, total_size)
+    progress = bar_function(current_size, total_size, width)
+    if progress:
+        sys.stdout.write("\r" + progress)
+
+class ThrowOnErrorOpener(urllib.FancyURLopener):
+    def http_error_default(self, url, fp, errcode, errmsg, headers):
+        raise Exception("%s: %s" % (errcode, errmsg))
+
+def download(url, out=None, bar=bar_adaptive):
+    """High level function, which downloads URL into tmp file in current
+    directory and then renames it to filename autodetected from either URL
+    or HTTP headers.
+
+    :param bar: function to track download progress (visualize etc.)
+    :param out: output filename or directory
+    :return:    filename where URL is downloaded to
+    """
+    names = dict()
+    names["out"] = out or ''
+    names["url"] = filename_from_url(url)
+    # get filename for temp file in current directory
+    prefix = (names["url"] or names["out"] or ".") + "."
+    (fd, tmpfile) = tempfile.mkstemp(".tmp", prefix=prefix, dir=".")
+    os.close(fd)
+    os.unlink(tmpfile)
+
+    # set progress monitoring callback
+    def callback_charged(blocks, block_size, total_size):
+        # 'closure' to set bar drawing function in callback
+        callback_progress(blocks, block_size, total_size, bar_function=bar)
+    if bar:
+        callback = callback_charged
+    else:
+        callback = None
+
+    (tmpfile, headers) = ThrowOnErrorOpener().retrieve(url, tmpfile, callback)
+    names["header"] = filename_from_headers(headers)
+    if os.path.isdir(names["out"]):
+        filename = names["header"] or names["url"]
+        filename = names["out"] + "/" + filename
+    else:
+        filename = names["out"] or names["header"] or names["url"]
+    # add numeric ' (x)' suffix if filename already exists
+    if os.path.exists(filename):
+        filename = filename_fix_existing(filename)
+    shutil.move(tmpfile, filename)
+
+    #print headers
+    return filename
+
+
+usage = """\
+usage: wget.py [options] URL
+
+options:
+  -o --output FILE|DIR   output filename or directory
+  -h --help
+  --version
+"""
+
+if __name__ == "__main__":
+    if len(sys.argv) < 2 or "-h" in sys.argv or "--help" in sys.argv:
+        sys.exit(usage)
+    if "--version" in sys.argv:
+        sys.exit("wget.py " + __version__)
+
+    from optparse import OptionParser
+    parser = OptionParser()
+    parser.add_option("-o", "--output", dest="output")
+    (options, args) = parser.parse_args()
+
+    url = sys.argv[1]
+    filename = download(args[0], out=options.output)
+
+    print("")
+    print("Saved under %s" % filename)
+
+r"""
+features that require more tuits for urlretrieve API
+http://www.python.org/doc/2.6/library/urllib.html#urllib.urlretrieve
+
+[x] autodetect filename from URL
+[x] autodetect filename from headers - Content-Disposition
+    http://greenbytes.de/tech/tc2231/
+[ ] make HEAD request to detect temp filename from Content-Disposition
+[ ] process HTTP status codes (i.e. 404 error)
+    http://ftp.de.debian.org/debian/pool/iso-codes_3.24.2.orig.tar.bz2
+[ ] catch KeyboardInterrupt
+[ ] optionally preserve incomplete file
+[x] create temp file in current directory
+[ ] resume download (broken connection)
+[ ] resume download (incomplete file)
+[x] show progress indicator
+    http://mail.python.org/pipermail/tutor/2005-May/038797.html
+[x] do not overwrite downloaded file
+ [x] rename file automatically if exists
+[x] optionally specify path for downloaded file
+
+[ ] options plan
+ [x] -h, --help, --version (CHAOS speccy)
+[ ] clpbar progress bar style
+_ 30.0Mb at  3.0 Mbps  eta:   0:00:20   30% [=====         ]
+[ ] test "bar \r" print with \r at the end of line on Windows
+[ ] process Python 2.x urllib.ContentTooShortError exception gracefully
+    (ideally retry and continue download)
+
+    (tmpfile, headers) = urllib.urlretrieve(url, tmpfile, callback_progress)
+  File "C:\Python27\lib\urllib.py", line 93, in urlretrieve
+    return _urlopener.retrieve(url, filename, reporthook, data)
+  File "C:\Python27\lib\urllib.py", line 283, in retrieve
+    "of %i bytes" % (read, size), result)
+urllib.ContentTooShortError: retrieval incomplete: got only 15239952 out of 24807571 bytes
+
+[ ] find out if urlretrieve may return unicode headers
+[ ] test suite for unsafe filenames from url and from headers
+
+[ ] security checks
+  [ ] filename_from_url
+  [ ] filename_from_headers
+  [ ] MITM redirect from https URL
+  [ ] https certificate check
+  [ ] size+hash check helpers
+    [ ] fail if size is known and mismatch
+    [ ] fail if hash mismatch
+"""

src/wgetHandler/wgetHandler.py

@@ -1,6 +1,7 @@
-from .wget import wget
 import math
 
+from .wget import wget
+
 # bar 를 커스텀.... 하는 어떤 글에서 가져온거
 def bar_custom(current, total, width=80):
     width=30